Portable Accessories

NNTN4496-BP4496
Battery NiCd 1100 mAh, NNTN4496 aftermarket battery for CP150/CP200/PR400. Includes generic spring belt clip as shown. Note: Motorola no longer manufactures the NNTN4496 1100 mAH NiCd battery. For radio users who utilize only slow rate drop-in chargers, this aftermarket NiCd...
$70.00
+
ZMN6038
2-Wire Surveillance Kit with extra loud earpiece, beige. Microphone and PTT combined. These surveillance kits require NNTN7869 Hirose Surveillance Keyload adapter. These kits enable customers to easily connect and disconnect the surveillance kit when they need to do keyloading.
$149.00
+
ZMN6032
2-Wire Surveillance Kit, beige. Microphone and PTT combined. These surveillance kits require NNTN7869 Hirose Surveillance Keyload adapter. These kits enable customers to easily connect and disconnect the surveillance kit when they need to do keyloading.
$143.00
+
ZMN6031
3-Wire Surveillance Kit, beige. Microphone and PTT are separate. These surveillance kits require NNTN7869 Hirose Surveillance Keyload adapter. These kits enable customers to easily connect and disconnect the surveillance kit when they need to do keyloading.
$177.00
+
WPPN4098
Adapter Plate Only
$35.00
+
Save 2%
WPPN4096
BMS battery adapter for use with NiCd, NiMH & Li-ion batteries.
$120.00 $117.60
You save: $2.40
+
WPPN4086
Adapter, compatible with NiCd, NiMH and Li-ion batteries.
$120.00
+
WPPN4085
BMSPLUS Li-ion Field Upgrade Kit. Upgrades WPLN4079AR, WPLN4080AR, WPLN4081AR. Allows units to support Li-ion batteries.
$126.50
+
Save 2%
WPPN4082
Adapter Plate for WPPN4065 4-station base, 110-volt charger.
$15.00 $14.70
You save: $0.30
+
WPPN4080
BMS Battery Adapter (for use with NiCd, NiMH & Li-ion batteries)
$120.00
+
WPPN4079
BMS Battery Adapter (for use with NiCd & NiMH batteries)
$80.00
+
WPPN4065
Motorola Conditioning Charger (MCC) Multi-Unit Charger, four-station base, 110V (order adapter plates separately).
$399.00
+
WPPN4021
7 Volt Adapter Plate
$15.00
+
WPPN4019
Adapter, compatible with NiCd batteries only.
$49.00
+
WPLN4232
WPLN4232 now PMPN4174. Innovative charging and reconditioning system that streamlines and automates battery maintenance. Talk time and life cycle are optimized as the need for manual maintenance programs is eliminated. Advanced conditioning features allow batteries to be left on the charger for extended periods of time without incurring heat damage. In addition, batteries left in the charger are kept fully charged so they are always ready when you need them. NOTE: Wall transformer may vary from transformer in picture. Mix and match any MOTOTRBO IMPRES or non-IMPRES radio battery (except SL 7550 battery) in these chargers.
$76.00
+
WPLN4208
The new IMPRES compatible vehicular charger has full IMPRES charger to battery communication capability.
$429.00
+
WPLN4192
Rapid-rate 110-volt charger with analytical information for up to six NiCd, NiMH or Li-ion batteries.
$595.00
+
WPLN4182
Rapid-rate 110-volt charger for NiCd, NiMH or Li-ion batteries.
$62.50
+
WPLN4138
Rapid Rate Desktop Charger for CP200, CP150, PR400
$57.75
+
WPLN4130
NO LONGER AVAILABLE. (Replacement PMPN4134 ) WPLN4130 multi-unit charger display modules provide powerful real-time analyzing information for IMPRES batteries, including current charge status; current battery mAh; percent rated capacity, battery voltage; battery kit number; battery...
$1,485.00
+
WPLN4124
90-240 Volt AC, 50/60 Hz, 4 Station Reconditioner. Provides powerful analyzing and reconditioning features. Includes 12 resident programs, a QuickTest diagnostic battery state of health program, programmable adapter plates, and much more. Supports NiCd, NiMH, Li-ion and SLA batteries....
$2,611.00
+
WPLN4111
This single-unit charger includes a 110V U.S. plug.   Replaced with PMPN4175
$181.50
+
PMPN4134
This IMPRES Multi-Unit Charger charges up to 6 batteries at a time and includes a US plug.
$1,250.00
+
WPLN4079
Battery Maintenance System Plus (BMS+) - 110 Volt AC, 50/60 Hz - Six Station Reconditioner. Using interchangeable adapter plates (sold separately),the BMS+ is capable of charging and discharging, analyzing, conditioning, cycle testing, and more. Supports NiCd, NiMH and Li-ion battery...
$650.00
+
WADN4190
Receive-only flexible earpiece. For Remote Speaker Microphones with 3.5mm audio jack.
$44.29
+
TDN9373
This portable radio hanger is for door panels from 2.75 to 3.25 inches.
$18.00
+
TDN9327
This portable radio hanger is for door panels up to 2.75 inches
$28.50
+
Save 10%
SNN5571/PMNN4497
Battery for the CLS series and VL50 portable radio. Now shipped as a higher capacity 1800 mAH Battery. aka PMNN4497, HCNN4006, 56557, SNN5571
$41.50 $37.15
You save: $4.35
+
Save 10%
RNN4012
Battery Li-ion 1500 mAh 3.6V (aka 53964)
$70.00 $63.00
You save: $7.00
+
Save 10%
RNN4007
This premium NiMH intrinsically safe battery provides more talk time per shift and is less prone to memory effect. Intrinsically safe batteries can be used in locations where flammable gas, vapors or combustible dust may be present.
$150.00 $135.00
You save: $15.00
+
RMN5117
 Interface Module for PTT or VOX Operation - Intrinsically Safe (FM)
$347.00
+
RMN5116
Receive and Transmit Boomless Temple Transducer
$248.00
+
RMN5076
VHF Public Safety Microphone, 24" Straight Cable with 3.5mm Audio Jack, volume switch and antenna (148-174 MHz Only)
$150.00
+
RMN5075
UHF microphone with 24-inch cord and 450-470 MHz antenna.
$150.00
+
RMN5058
Single ear, lightweight headset for comfortable, convenient communications.
$92.70
+
RMN5049
This rugged headset allows users to receive audio without covering the ear.
$340.00
+
RMN5048
Rugged Temple Transducer - Fully adjustable over-the-head style headset allows user to receive audio through the temples. Headset comes with a larger In-Line PTT and a larger noise canceling boom microphone than the standardmodel - Intrinsically Safe (FM)
$290.00
+
RMN5038
Remote speaker microphone with orange programmable button.
$120.00
+
RMN5036
VHF microphone with 30-inch cord and 148-174 MHz antenna.
$150.00
+
RMN5035
UHF microphone with 30-inch cord and 450-470 MHz antenna.
$150.00
+
RMN4057
Mounts easily to hard hats with slots. Receive-Only Headsets are the right choice for high-noise environments where users must hear information clearly, but seldom need to transmit. Dual-Muff headsets feature easily replaceable earseals filled with a liquid and foam combination to...
$130.50
+
RMN4056
Receive-Only Dual-Muff Headband Style Headset, provides 24dB of noise reduction; for use with NMN6193 and NMN6161 (can be plugged directly into radio with BND6676 adapter)
$130.50
+
RMN4053
Ideal for two-way communication in extremely noisy environments. Dual-Muff, tactical headsets include 2 microphones on outside of earcups which reproduce ambient sound back into headset. Harmful sounds are suppressed to safe levels and low sounds are amplified up to 5 times original...
$349.50
+
RMN4052
This grey, tactical-headband style headset has a noise reduction rating of 24dB.
$349.50
+
RMN4051
This black two-way headset has a noise-cancelling boom microphone and a noise reduction rating of 22dB.
$269.10
+
RMN4049
This lightweight headset allows users to receive audio without covering the ear.
$225.00
+
Show another 48 products